Stihl GTA 40 Cordless Pruner

Compatible with AS series batteries

STIHL GTA 40 in a set with 2 STIHL AS 2 lithium-ion batteries and the STIHL AL 5-2 fast charger. Robust case for the device, capable of holding the GTA 40, the charger, and up to 6 batteries

• The STIHL GTA 40 battery pruner operates with 2 lithium-ion batteries from the STIHL AS system and is ideal for caring for trees and shrubs, professional gardening and landscaping work, and processing wood and woody materials on construction sites
• Additionally, the STIHL GTA 40 can be used by qualified arborists to make cuts in tree canopies. Whether it’s tree care in parks and gardens, canopy corrections, drywall construction, indoor work, or roofing tasks: the GTA 40 impresses not only with its compact design, lightweight, and balanced straight, reverse, and plunge cuts, but also with its high cutting performance and long battery life
• The basis for clean cuts and fast work progress is the particularly powerful EC motor and the STIHL 1/4" PM3 saw chain
• Another advantage of the STIHL GTA 40 is the automatic chain lubrication based on speed.

TECHNICAL DATA

Rated voltage: 21.6 V
Power consumption: 520 W
Power: 0.41 kW
Battery system: AS
Weight: 1.4 kg
Bar length: 15 cm
Chain pitch: 1/4" P
Guide bar groove width: 1.1
IP protection rating: IPX4
Sound pressure level: 82 dB(A)
Sound power level: 90 dB(A)
Left vibration value: 4.5 m/s²
Right vibration value: 4.2 m/s² 

EQUIPMENT 

SIDE CHAIN TENSIONING

For easy and secure tightening. The side chain tensioning allows the chain to be retensioned and replaced safely, simply, and quickly. The tensioning screw is operated from the side through the sprocket cover

TOOL-FREE FUEL CAP REMOVAL

Fast and easy to use. Thanks to the bayonet closure, it is possible to open and close the fuel tank cap in a few simple steps without the need for tools

LED CHARGE LEVEL INDICATOR

For effective planning. By pressing a button, the LED charge level indicator informs you at any time about the remaining battery capacity. This allows you to plan your working hours efficiently and recharge the battery in time

MOUNTING HOLE AND OVERLOAD RING

To attach a fall protection device. To prevent the hedge trimmer from falling during climbing, the overload ring included in the delivery is hooked onto one of the suspension eyelets on both sides and then secured to the climbing harness, for example with a carabiner and a short rope

EC MOTOR

Low maintenance and efficiency. Thanks to its compact design, low weight, and high efficiency, the EC motor enables energy-efficient work. Additionally, this motor has a long service life

ANTI-LOSS NUTS

Protection against loss. The nuts are securely fastened to the sprocket cover. This means that when removing the cover, the nuts cannot fall off and get lost

CONSTANT POWER

Consistent performance regardless of battery charge level. With battery tools from other brands, performance usually decreases during operation as the battery discharges. With STIHL battery tools equipped with CONSTANT POWER, this does not happen. Thanks to intelligent electronics, your STIHL tool consistently operates at high performance

IPX4 CERTIFICATION

Protection against splashes. The IPX protection classes define the moisture protection of electrical or electronic devices. The moisture protection test is defined in several stages. IPX4 tests protection against water splashes from all sides.