Fast delivery with value insured
Secure payments
Other information
- Does not shrink
- Does not crack or dust
- Easily sandable
- Excellent plastic resistance
- 5 Kg bag
TECHNICAL DATA
Working time: 90 minutes
Application temperature: from 5°C to 40°C
Drying time at 20°C: approximately 1 to 3 hours
Maximum layer thickness: 2/3 mm
Coverage: 1 m²/kg (1 mm thickness)
Paintable: after drying.
Specifically for indoor use
Recommended tools: spatula and trowel
FEATURES:
NEWSTUK SPECIAL is a white filler composed of super-ventilated gypsum, carefully selected aggregates, and resins, allowing for a highly professional product.
HOW TO USE:
Clean the surface to be treated without wetting, dust off, and completely remove any loose plaster pieces and old paint that is not well adhered. Mix manually and/or with a low-speed electric mixer in a clean container, 1 (one) part clean water with 2 (two) parts NEWSTUK SPECIAL until a homogeneous, lump-free paste is obtained. Use NEWSTUK SPECIAL in its original state, without adding foreign materials.
WHERE TO USE:
The resulting product is ideal for creating high-quality finishes. Excellent for skimming and bonding drywall panels, filling joints, restoring cracked plaster, and leveling imperfect walls.
PRACTICAL TIPS:
Store packages on wooden pallets in dry places. Carefully reseal the package after partial use. The presence of chlorine in water causes faster drying. The presence of salt in water causes slower drying. Using dirty containers with foreign materials (gypsum and cement residues) compromises the technical characteristics of the filler, both during mixing and drying.
USAGE WARNINGS:
Paints, coatings, wallpapers, etc., should only be applied after the product is completely dry and cured. Preparing NEWSTUK SPECIAL with electric tools may alter the properties of the filler; therefore, it is recommended to prepare small quantities using a mechanical mixer at low speed (<800 rpm).
Do not use at too low temperatures.
